- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Good day
We have a case with Accusine PCS+ 300A when connected temporarily with a 200A MCCB for power up test, we had issued on earth leakage trip relay upstream whenever the 200A breaker is turned ON. We had 2 units at site with same behaviour. The ELR setting was at 300mA. We tried with 500mA and it was the same. Could it be faulty components?
Has anyone experience this?
TQ
EY
- Labels:
-
Power Quality
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hi EY
I think already Mike fry -L4 Expert(Accusine) has replied you on this topic,
Here is the reply from Mike----With ELR you should open the IT switches. See if that corrects the issue.

Posted: 2019-08-05 07:03 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.

Posted: 2019-08-06 12:20 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hi,
if you still have not solved the problem, suggest you to contact local support team TSC,
they will create a case in BFO tool and escalate it if will needed .
BR
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.

Posted: 2019-08-20 07:58 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hi @sesa108084_brid,
If @Arunprasad helped you to solve your problem, please click on “Accept as Solution” so other members can find the same solution through the search bar. Thank you!

