EPU305LCD - suggested maximum length on measurement hose?

[NikhiL4]

Hello there,

A consultant reaching out with a question, what is the suggested maximum length of tubing/hose used for differential pressure measurement? Commercial Reference: EPU305LCD

Thanks for any help!

Regards.

[NikhiL4 · Accepted solution]

Discussed internally and got following feedback:

Its a "rule of thumb" recommendation not based any testing of this.  

The general guidance is to keep the runs of tubing as short as possible to maintain accuracy and response time.  I would recommend tubing no longer than 100 ft for best performance.  

However, if longer distances are required, the customer should validate the performance of a single unit prior to committing to a full build.