how to enable scanned devices on Netbotz 570

[DCIM_Support]

Dear guys,

I have a Netbotz 570 which has disabled the Scanned Devices icon and it not appeat the Device Crawlers icon. How can I activate these options?

Best regards,

Enric Climent

(CID:105461490)

[DCIM_Support]

Dear Enric, 

In order to enable "Scanned Devices" option on Advance View of Netbotz, you need to activate NBWN0006 - NetBotz Device Monitoring (Five Nodes) Pack License key. 

http://www.apc.com/shop/gb/en/products/NetBotz-Device-Monitoring-Five-Nodes-Pack/P-NBWN0006

From Netbotz 570 User Manual:

The Scanned Devices icon is only available with the purchase of the 5-node Scanner. 

Scanned devices are SNMP targets that are monitored by the NetBotz appliance. You can monitor status information for up to five remote SNMP targets such as servers, routers, and switches as well as APC devices such as APC UPSs and APC Rack Power Distribution Units (PDUs). When you add SNMP targets, each target appears in the Navigation pane. Once added, you can set thresholds, monitor alerts, and graph reported data. For APC devices, at user-configurable intervals, the appliance retrieves sensor information specific to the APC device.

 Regards,

Bala

(CID:105461494)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.