Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84268members
353375posts

Will NBES0302 work on a rack access pod

EcoStruxure IT forum

A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.

Solved
DCIM_Support
Picard
Picard
0 Likes
2
235

Will NBES0302 work on a rack access pod

This question was originally posted on DCIM Support by Kevin Kolobe on 2017-08-10


Can one use Netbotz Door Sensors (NBES0302) for rooms and third party racks on a rack access pod(NBPD0172)?

(CID:123346793)


Accepted Solutions
DCIM_Support
Picard
Picard
0 Likes
0
235

Re: Will NBES0302 work on a rack access pod

This answer was originally posted on DCIM Support by Jackie Lehr on 2017-08-10


Hi Kevin,

Yes, it's listed in the installation manual. You can download the manual from the PDF Library here on DCIM Support. PDF Library

Best,

Jackie

 

(CID:123346799)

See Answer In Context

2 Replies 2
DCIM_Support
Picard
Picard
0 Likes
0
236

Re: Will NBES0302 work on a rack access pod

This answer was originally posted on DCIM Support by Jackie Lehr on 2017-08-10


Hi Kevin,

Yes, it's listed in the installation manual. You can download the manual from the PDF Library here on DCIM Support. PDF Library

Best,

Jackie

 

(CID:123346799)

DCIM_Support
Picard
Picard
0 Likes
0
235

🔒 Closed

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.