StruxureOn GW 1.1.0.43: bugs on ATS AP77xx device page?

[DCIM_Support]

This question was originally posted on DCIM Support by spezialist on 2017-09-14

---

Hi all!

I performed a clean installation of the latest software StruxureOn GW 1.1.0.43 with device discovering. At the same time I found these bugs on ATS AP77xx device page:

In earlier versions of the StruxureOn GW software this was not.

Very thanks for the support.

(CID:124527614)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Brian Behbehani on 2017-09-15

---

Hello,

Thanks for your feedback and discovering this bug. We believe we have a fix ready to go and will include it in our next patch release (1.1.1). It should be available next week. 

(CID:124528388)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2017-09-18

---

Hi Brian Behbehani,

Many thanks for the feedback.

I will definitely wait for a new release to make sure that the bug is gone. Today I will publish one post: it seems that one more bug has appeared 😀.

Very thanks for the support.

(CID:125208506)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2017-09-25

---

Hi Brian Behbehani,

I checked: indeed, in the update StruxureOn GW 1.1.1.16 the above bug is fixed, but it is required to perform an ATS discovery again.

Very thanks for the support.

(CID:125211688)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.