StruxureOn GW 1.0.3.40: HiRef NADR/NAUR detected as Aquascroll CRAC?

[DCIM_Support]

Hi all!

I found here such bug: starting with new SxOn version 1.0.3.40 the cooling units of HiRef, for example, NADR/NAUR0341 are detected by the SNMP protocol as Uniflair/Schneider-Electric Aquascroll cooling units. Of course at the same time values of all sensors are wrong.

On demand I can send more detailed information.

Very thanks for the support.

(CID:115345182)

[DCIM_Support]

Hello,

does this happen when discovering via SNMP or Modbus?

Regards,

Nick

(CID:115345417)

[DCIM_Support]

Hi Nicholas St. Pierre,

This happen when I discovered CRAC units via SNMP.

Very thanks for the support.

(CID:115345464)

[DCIM_Support · Accepted solution]

Okay, this is a known issue that we are looking into. Thank you for your input.

Regards,

Nick

(CID:116361609)

[DCIM_Support]

Ok, I will be glad to help 😀.

(CID:116361613)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.