EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Posted: 2020-07-05 08:31 PM
This question was originally posted on DCIM Support by Victor Juarez Velazquez on 2019-07-09
Please confirm which domo PTZ pelco models (For interiors) are compatible with Netbotz 450?
(CID:146671191)
Posted: 2020-07-05 08:31 PM
This answer was originally posted on DCIM Support by Steven Marchetti on 2019-07-10
Hi Victor,
The following k-base provides the info on all supported Pelco models:
http://www.apc.com/us/en/faqs/FA158450
Please note the following from the help files for NetBotz under:
Pod, Pelco Camera, and Rack Access PX-HID SharingThe maximum number of shared pods an appliance can manage depends on the appliance:
Appliance |
Shared Pod Capability |
NetBotz 550 and 570 |
Can host up to 16 shared pods. The total shared pods can be physically connected to or integrated with up to eight NetBotz appliances. Up to four of the shared pods can be camera pods. Can host the Rack Access PX-HID. |
NetBotz 455 |
Can host up to eight shared pods. Up to two of the shared pods can be camera pods. Can host the Rack Access PX-HID. |
NetBotz 450 |
Can only host the Rack Access PX-HID. |
NetBotz 355 |
Does not have pod sharing capabilities. |
So if you have the NBRK0450, NO Pelco cameras are supported.
Thanks,
Steve
(CID:147194134)
Posted: 2020-07-05 08:31 PM
This answer was originally posted on DCIM Support by Steven Marchetti on 2019-07-10
Hi Victor,
The following k-base provides the info on all supported Pelco models:
http://www.apc.com/us/en/faqs/FA158450
Please note the following from the help files for NetBotz under:
Pod, Pelco Camera, and Rack Access PX-HID SharingThe maximum number of shared pods an appliance can manage depends on the appliance:
Appliance |
Shared Pod Capability |
NetBotz 550 and 570 |
Can host up to 16 shared pods. The total shared pods can be physically connected to or integrated with up to eight NetBotz appliances. Up to four of the shared pods can be camera pods. Can host the Rack Access PX-HID. |
NetBotz 455 |
Can host up to eight shared pods. Up to two of the shared pods can be camera pods. Can host the Rack Access PX-HID. |
NetBotz 450 |
Can only host the Rack Access PX-HID. |
NetBotz 355 |
Does not have pod sharing capabilities. |
So if you have the NBRK0450, NO Pelco cameras are supported.
Thanks,
Steve
(CID:147194134)
Posted: 2020-07-05 08:32 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.