New SNMP-Trap, old OID and MIB?

[DCIM_Support]

I use firmware v.4.5.1 and system send snmp-trap with OID 1.3.6.1.4.1.5528.100.10.2.0.10, 1.3.6.1.4.1.5528.100.10.2.32, 1.3.6.1.4.1.5528.100.10.2.33 etc.

In Last version MIB NETBOTZ410 (LAST-UPDATED "201104120000Z") its traps are missing.

Where i can get actual version MIB or how version firmware i can use with MIB 410?

(CID:105471519)

[DCIM_Support]

Hi Victor!

Latest version is 417.

You can find it on apc.com or in attachment.

powernet417.mib

(CID:105471522)

[DCIM_Support]

Hi Valentin! It's MIB for APC UPS. NetBotz traps are missing.

(CID:105471539)

[DCIM_Support · Accepted solution]

Hi Victor,

There is a new version of the NetBotz MIB being created and it should be available soon. I had specifically seen issues with the OIDs you mentioned and noted that in an enhancement request. These OIDs should be in the next revision due out soon. When available, the NetBotz MIB should be on the APC software downloads page:

www.apc.com/tools/download

Steve

(CID:105471543)

[DCIM_Support]

Hi Victor, If you would like an early evaluation of the new NetBotz410 MIB, I'm attaching it here. It is running through our final testing process right now, and will be available to download from the APC website in a few weeks. But I thought I'd offer you the opportunity to try it out now and make sure it solves your issue. -Scott

netbotz410.mib

(CID:105474375)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.