Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hi Bala,
NetBotz can be configured with thresholds on any device it can monitor. The NetBotz does not receive traps nor does it have priority scanning as DCE does. If you are polling once every 1 minute (default) and a threshold is breached but resolves before the bot can poll the device, you can miss it. That means anything lasting less than a minute could potentially be missed. We do poll a good number of OIDs bus the DDF is not updated on a regular basis and we don't use the DCE DDF files. This is from an SUVT30 with no load on it.:
Steve
Link copied. Please paste this link to share this article on your social media post.
Hi Bala,
NetBotz can be configured with thresholds on any device it can monitor. The NetBotz does not receive traps nor does it have priority scanning as DCE does. If you are polling once every 1 minute (default) and a threshold is breached but resolves before the bot can poll the device, you can miss it. That means anything lasting less than a minute could potentially be missed. We do poll a good number of OIDs bus the DDF is not updated on a regular basis and we don't use the DCE DDF files. This is from an SUVT30 with no load on it.:
Steve
Link copied. Please paste this link to share this article on your social media post.
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.