- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 05:19 PM . Last Modified: 2024-04-04 11:57 PM
NetBotz 570 - Pelco D5118 camera motion sensor missing
Adding Pelco D5118 camera to NetBotz 750 (version 4.6.2) does not discover camera motion sensor. Under Shared Camera Configuration for Sensor configuration there would normally be a Camera Motion sensor although the sensor is missing. (see attachments)
(CID:131336353)
- Labels:
-
NetBotz
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 05:19 PM . Last Modified: 2024-04-04 11:57 PM
Issue resolved by booting Pelco camera followed by booting NetBotz appliance.
(CID:131958718)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 05:19 PM . Last Modified: 2024-04-04 11:57 PM
Pelco D5118 has available motion detection?
(CID:131961288)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 05:19 PM . Last Modified: 2024-04-04 11:57 PM
Do you have others pelco cameras connected to Nb 750?
(CID:131961290)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 05:19 PM . Last Modified: 2024-04-04 11:57 PM
Issue resolved by booting Pelco camera followed by booting NetBotz appliance.
(CID:131958718)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 05:20 PM . Last Modified: 2023-10-22 03:12 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
