Name of one of DCE Option Modules?

[DCIM_Support]

What is the name of the DCE option that allows 3rd party software to get individual device data via DCE?

(CID:106206911)

[DCIM_Support]

That would be Network Management System Integration.  It can be found under the Alarm Configuration menu.

(CID:106206914)

[DCIM_Support]

That's for trap receiver and not what I referred to. This option is purchased separately. I saw its description before somewhere. Instead of communicating with individual device directly, 3rd part software can get device data by communicating with DCE with the option installed.

(CID:106206915)

[DCIM_Support]

Yes, MODBUS TCP Output Module. Is there any manual or guide about it?

(CID:106206921)

[DCIM_Support]

https://dcimsupport.apc.com/pages/releaseview.action?pageId=92078256 All the documentation that I'm aware of begins on this page. There's only 3-4 pages walking you through the menus.

(CID:106206923)

[DCIM_Support]

Hi Yang,

If you are looking for some way to poll DCE using a 3rd party program, you can use something like the Web API available for free on the software downloads page:

www.apc.com/tools/download and I believe you may be able to find it on this site too.

If you're looking for something else, please be more specific. To what external or 3rd party software are you referring? What protocols etc? If you're looking for an integration with something like SCOM, I do not believe that is available any longer.

Steve

(CID:106206919)

[DCIM_Support]

Are you referring to the Modbus TCP Output Module? This is the only purchasable item I can think of that will allow a third party system to monitor devices through DCE.

(CID:106206922)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.