EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:16 AM . Last Modified: 2024-04-09 12:00 AM
A customer asked the following:
"Our existing solution integrates with our Network Management Solution (Solarwinds Ipmonitor) via snmp. Can you provide information to me on integrating the Netbotz solution with snmp as well?"
I have never dealt with solar winds before and would like to know if this is possible and where I can get the information to supply to the customer.
Thanks in advance!
(CID:106205533)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:16 AM . Last Modified: 2024-04-09 12:00 AM
Hello,
You can enable the SNMP Agent in NetBotz Advanced View. In Configuration, there is a SNMP icon listed under Appliance Settings. The NetBotz MIB can be downloaded directly from the appliance using the URL below.
http://ip_address_of_appliance/netbotzv3.mib
Or you can also download it from the APC website.
Regards
John T
(CID:106205537)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:16 AM . Last Modified: 2024-04-09 12:00 AM
Hi,
We don't have any specific integration with solar winds. We do have SNMP output however and the NetBotz MIB is available both at the APC software downloads page:
as well as on the device itself.
http://
Replacing
Steve
(CID:106205539)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:17 AM . Last Modified: 2023-10-31 11:10 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.