Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84483members
353699posts

IPV4 migration to IPV6 protocol (How upgrade to firmware)

EcoStruxure IT forum

A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.

DCIM_Support
Picard
Picard
0 Likes
2
291

IPV4 migration to IPV6 protocol (How upgrade to firmware)

This question was originally posted on DCIM Support by Leonardo Suarez on 2019-05-14


Good day,

I have several costumers that have DCE 7.X.X and many equipments (UPS-Symmetra PX,LX, Galaxy 3500, Air Cooling-ACSC100, RP100, RC100, Netbotz-450,570,455) and they need to know if possible use IPV6 in your network card (internal and external). Moreover, they want to know if is possible that the DCE can have one IP direction with IPV6 protocol (own network LAN private and/or public), as that the network card AP96XX have this protocol (IPV6) but would be singular that DCE can not access to them because generally DCIM is operating with IPV4 . Please help me to know how I can update IPV4 cards to IPV6 (process) in the case of UPS, Netbotz and in the case of ACSC100 , FM35 air conditioners, because their firmware has only IPV4.

In our country, public entities by law have to migrate to IPV6 protocol all the systems.

Best regards

Leonardo Suárez R. from Colombia

(CID:143758148)

2 Replies 2
DCIM_Support
Picard
Picard
0 Likes
0
292

Re: IPV4 migration to IPV6 protocol (How upgrade to firmware)

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-05-14


Hi Leonardo,


StruxureWare DCE is not capable of monitoring devices with IPv6 addresses. There is a plan to allow DCE to use an IPv6 address in the future but nothing planned as of yet to monitor such systems.


As for the NMC devices, the version 5.1.1 firmware compatible devices do allow for IPv6 compatibility.

K-base FA156115 provides more specific documentation on this issue.

 

Thanks,

Steve

(CID:143758167)

DCIM_Support
Picard
Picard
0 Likes
0
292

🔒 Closed

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.