How to reset the Rack monitor 570

[DCIM_Support]

(CID:134022907)

[DCIM_Support]

Dear Shoaib Maqsood,

If you mean reset NetBotz-4.x appliance to the default login values, then according NetBotz Rack Monitor 450/550/570 Installation and Quick Configuration Manual you need:

I hope this is what you need.

With respect.

(CID:134022919)

[DCIM_Support]

Hello dear,

I  want to factory default the Rack monitor . Because i can,t access the rack monitor through network or console port .

(CID:134022947)

[DCIM_Support]

Dear Shoaib Maqsood,

Then the above instruction is what you need.

However, you still need to serial connect your laptop/PC to the console port NetBotz-4.x appliance in accordance with the instructions:

With respect.

(CID:134022955)

[DCIM_Support]

what did you mean by ( step 1 ) .

(Connect USB A to USB mini B cable to the console port on Netbotz Appliance)

(CID:134023016)

[DCIM_Support]

This is 5-m (16.4-ft) USB cable included with your NetBotz-4.x appliance.

(CID:134023031)

[DCIM_Support]

Hello Dear,

I have a rack monitor 570. After applying this procedure it stop on a starting boot services. On other side when we connect this rack monitor with advance view utility it stop on this step.  Image is attached for your kind reference. 

(CID:136152978)

[DCIM_Support]

Hello Shoaib, please check this link: http://www.apc.com/nl/en/faqs/index?page=content&id=FA158175

(CID:134023009)

[DCIM_Support]

Dear Shoaib, 

If the Netbotz is still reachable via a web browser, you can do the same by accessing the page below

http:// 

Once the appropriate credentials are provided, it will bring up a message saying that the restart has been initiated.

Otherwise, you can do issue the configreset command after establishing a terminal emulation (HyperTerminal) session to the Netbotz appliance after following the instructions laid out in one of Spezialist's comments.

I hope this helps.

Kind regards,

Justine

(CID:134023213)

[DCIM_Support]

Dear Shoaib Maqsood,

Tell us, please, have you solved this question or not?

With respect.

(CID:134026450)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.