HP OneView integration and Asset Audit

DCIM_Support · ‎2020-07-04

If we have a blade enclosure from HP OneView that is associated to its counterpart in Data Center Operation, what will the Asset Audit report then show if a blade is moved?

Someone moves the blade from one position to another (same or different enclosure)
HP OneView registers this event
DCO reads the updated information from HP OneView and updates the model accordingly

What will the Asset Audit report of the blade and the enclosures then show?

Thanks!

DCIM_Support · ‎2020-07-04

Hi Christian,

Unfortunately I don't have access to such/described setup to test and provide a clear answer, but I think if DCO gets the updates from the integrated HP Oneview, then the asset audit reports may contain information about the events (Added, Moved, Removed device). Obviously those reports/events may not contain 'user name' (so user name filed may be empty).

Kind regards

See Answer In Context

DCIM_Support · ‎2020-07-04

Hi Christian,

Unfortunately I don't have access to such/described setup to test and provide a clear answer, but I think if DCO gets the updates from the integrated HP Oneview, then the asset audit reports may contain information about the events (Added, Moved, Removed device). Obviously those reports/events may not contain 'user name' (so user name filed may be empty).

Kind regards

DCIM_Support · ‎2020-07-04

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.