Enerlin’X IFE

[DCIM_Support]

Gents,

I would like if anyone has already used Enerlin'X IFE with DCE ? 

Best regards

(CID:148342130)

[DCIM_Support]

Dear Ali Chams,

For example, I do not use it, however you marked the question with the tag ddf. But the above mentioned =SE= series modules are communication modules for which DDF-files are not needed. Did you mean that?

With respect.

(CID:148342139)

[DCIM_Support]

Thanks For your answer.

In fact, my question could be in two parts : 1/ do we have a DDF for Enerlin'X IFE, and 2/ If anyone can share with me his experience 

Cheers

(CID:148770495)

[DCIM_Support]

Dear Ali Chams,

As I answered earlier, you do not need a DDF-file for these communication modules.

On the contrary, you need DDF-files for the devices, that you connect to these communication modules.

With respect.

(CID:148342152)

[DCIM_Support]

Ok, Thanks for your clarification...

(CID:148770487)

[DCIM_Support]

Yes used it often without problems. As spezialist said you don't need a ddf for the ife. You need the ddf for the connected device behind the ife. It's used like a egx100.

(CID:148342163)

[DCIM_Support]

Dear Ueli,

Nice to hear from you, and thanks for your feedback...

Cheers.

(CID:148770483)

[DCIM_Support]

Dear Ali Chams,

Please tell us, were you able to solve your question or not?

With respect.

(CID:148771909)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.