- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 01:14 PM . Last Modified: 2024-04-08 01:41 AM
DCO - Export infromation from racks in Power layer
I would like to export information what I can see on the popup menu when move my cursor over the cabinet at power layout:
I need the Total columns like Estimated load and Peak Power from each cabinet in a room. How can I do that?
(CID:112623841)
- Labels:
-
Data Center Operation
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 01:15 PM . Last Modified: 2024-04-08 01:41 AM
Hi Mate,
I think some information/data could be exported via ETL integration (External system integration through ETL , ETL Export Database ) and/or by simply generating Capacity History Reports (for Measured Peak Power, Measured Peak Power feed, Estimated Load, Estimated Load per feed).
Kind regards
(CID:113644264)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 01:15 PM . Last Modified: 2023-10-22 01:37 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.