DCO Delete walls

[DCIM_Support]

How do I delete walls in DCO? We reconfigured out room and removed some walls. Do I have to completely rebuild my data center floor and all the racks?

I am unable to move the room partitions which were in the old layout.

(CID:130681443)

[DCIM_Support]

Hi John,

I would try to use the Design tool to delete/modify the manually created walls and/or reshape the walls.

An example to delete a wall, Design mode enabled (highlighted with dashed circle) right click on a manually created wall and "Delete" (or modify):

Reshape/modify a wall: using the resize tool, click on a wall and then drag to left/right to move the wall:

And/or "Add Corner"and then reshape the wall:

Hope this helps,

Kind regards

(CID:130681533)

[DCIM_Support]

The wall you are referring too is an "interior" wall, right? The one highlighted blue in the first image?

I originally used an exterior wall, extended into the DC Floor. When I try that delete button, it prompts me if I want to delete the whole floor...

(CID:131336559)

[DCIM_Support]

Hi John,

Yes, that was an "interior" wall (which had been created manually). (first illustration/image)

The "exterior" walls, which are not created manually, cannot be selected for delete, but can be reshaped (my last illustration/image).

Kind regards

(CID:131336567)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.