Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Link copied. Please paste this link to share this article on your social media post.
Hi team,
we have an installation with DCE 7.5 and we are not capable to run a backup properly.
It seems that everything is configured rigth, but backup always fails.
In web client we only see this:
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Dear Javier,
Have you tried "TCP" Protocol instead of "UDP"?
Please try "TCP" protocol option and see if it helps. I have seen issues when using UDP protocol for NFS3.
Please also make sure that there is no firewall block/network settings such as permission on your NFS when this issue occurs.
You may also contact your regional technical support team with DCE capture logs so that technical support team can go through DCE capture logs file and see the reason for backup failure.
To gather the log files browse to http://
Input user credentials.
When the page loads click on "Create Server Log Archive"
After the process is completed download the log files.
Link copied. Please paste this link to share this article on your social media post.
Dear Javier,
Have you tried "TCP" Protocol instead of "UDP"?
Please try "TCP" protocol option and see if it helps. I have seen issues when using UDP protocol for NFS3.
Please also make sure that there is no firewall block/network settings such as permission on your NFS when this issue occurs.
You may also contact your regional technical support team with DCE capture logs so that technical support team can go through DCE capture logs file and see the reason for backup failure.
To gather the log files browse to http://
Input user credentials.
When the page loads click on "Create Server Log Archive"
After the process is completed download the log files.
Link copied. Please paste this link to share this article on your social media post.
Hi Balaraman,
now with TCP it has worked properly.
Many thanks!
Link copied. Please paste this link to share this article on your social media post.
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.