Cisco UCS Integration User Type

[DCIM_Support]

Anyone knows what type of Cisco UCS user has to be used for the integration with DCO?

The respective integration guide does not specify user type:

https://sxwhelpcenter.ecostruxureit.com/display/public/UADCO8x/Configuring+Cisco+UCS+Manager+integra...

(CID:150732883)

[DCIM_Support]

Hello Nikolaos. According to this page (https://sxwhelpcenter.ecostruxureit.com/display/UADCO8x/Cisco+UCS+Manager+integration+requirements) the integration requires a user account with this access: "A user has been set up on the Cisco UCS Manager with rights to access the web services in the API."

Regards

Greg Sterling

(CID:150733226)

[DCIM_Support]

Unfortunately, I cannot see the link you are specifying, although I am an employee of a Schneider Electric Elite Partner company. I get the following message:

How can I view the link?

(CID:151061112)

[DCIM_Support]

Sorry. The community is in the process of being migrated to a new platform so its possible this security issue is due to those pending changes. I have pasted the content below.

Cisco UCS Manager integration requirements PUBLISHED

Configuring integration between StruxureWare Data Center Operation and Cisco UCS Manager requires:

• A user has been set up on the Cisco UCS Manager with rights to access the web services in the API.
• Communication on the port used on the Cisco UCS Manager and, if SSL is wanted, it must be enabled.

Default ports:
http: 80
https: 443

The rest of the configuration happens on the Cisco UCS Manager.

Regards

Greg Sterling

(CID:151061125)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.