HP OneView Integration User Type

[DCIM_Support]

This question was originally posted on DCIM Support by Nikolaos Panagiotou on 2019-10-25

---

Our customer prefers not to use an administrator user of the HP OneView for the integration with DCO. Would a user with less rights work?

The integration guide specifies an administrator user (https://sxwhelpcenter.ecostruxureit.com/display/public/UADCO8x/HP+OneView+integration), but the DCO basically only polls/reads information from the HP OneView, so probably a user with less right would work.

Any insights?

(CID:150732880)

[DCIM_Support]

This answer was originally posted on DCIM Support by Jef Faridi on 2019-10-28

---

Hi Nikolaos,

I think it was basically designed that the integration/integrated user should be able to get data from the HP OneView. Using a user with less rights might break the integration, but I don't think that's been tested.

Kind regards

(CID:151060684)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.