Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82506members
350107posts

disabling the buzzer

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
davidwf_apc
Ensign
Ensign
0 Likes
2
210

disabling the buzzer

This was originally posted on APC forums on 3/3/2012


I have an SUA750i on the PC another on the kids' Playstation & TV, an SUA 1500 on the main TV/sound system, a CS350 on the TV aerial amp and another CS350 on the broadband router - yes, our mains is s**t !!.....my question is can I disable the beeping from the CS UPS's as I have on the SUA's via Powerchute.
There are no serial or USB ports on the CS units only a data port that needs a special connector that I don't have, one of the CS 350 beeps every 30 seconds or so when on battery the other one (that I bought second hand) only beeps when the battery has expired, so possibly someone has managed to disable it ???


Accepted Solutions
davidwf_apc
Ensign
Ensign
0 Likes
0
210

Re: disabling the buzzer

This was originally posted on APC forums on 3/13/2012


many thanks 🙂

See Answer In Context

2 Replies 2
BillP
Administrator Administrator
Administrator
0 Likes
0
210

Re: disabling the buzzer

This reply was originally posted by Jonathan on APC forums on 3/13/2012


Hi David,

If that data port looks like an RJ45 then you will need to use this cable - [AP9827|http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=AP9827] and connect the device into a PC and install PowerChute Personal Edition and from there you'll see the settings on disabling the battery alarms.

Attachments
davidwf_apc
Ensign
Ensign
0 Likes
0
211

Re: disabling the buzzer

This was originally posted on APC forums on 3/13/2012


many thanks 🙂