Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82397members
349903posts

PowerView Cable - 940-0110 - Desperate!!!

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
RayoVac_apc
Cadet
0 Likes
2
145

PowerView Cable - 940-0110 - Desperate!!!

This was originally posted on APC forums on 9/4/2012


I have a PowerView AP9215 that we use frequently for quick UPS checkups etc. as we don't have many NetManage cards in the older units.

I could not find our interface cable and after doing some investigation it turns out one of our support techs slammed it in a rack door, apparently severing an end. And instead of confessing and letting someone know so we could attempt repair or replacement... he threw it in the trash.

I have been googling for days trying to find the 940-0110 cable with no success. APC of course considers the PowerView discontinued and I find no mention of the cable available anywhere. Yes, I have scoured eBay and the InterWeb for second hand to no resolve.

Any assistance would be GREATLY appreciated. (I even thought I could make my own, but of course all the APC pinouts are highly secret and non-standard, so no luck there either).

Thanks,

Raymond


Accepted Solutions
flecom_apc
Ensign
Ensign
0 Likes
0
145

Re: PowerView Cable - 940-0110 - Desperate!!!

This was originally posted on APC forums on 9/18/2012


heh I actually had the exact same issue... I ended up finding another one, cant remember how, and took the opportunity to take it apart... there is no "pinout" available because there is a little PCB inside with 4 PNP transistors a relay and a pair of diodes... they also potted the whole thing (filled the connector with glue) so it was quite an adventure!

I would post the schematic but I am not sure how APC (and more importantly their legal department) would feel about that

See Answer In Context

2 Replies 2
BillP
Administrator Administrator
Administrator
0 Likes
0
145

Re: PowerView Cable - 940-0110 - Desperate!!!

This reply was originally posted by Angela on APC forums on 9/5/2012


i see we have a few in stock. have you tried to contact APC support for one..?

flecom_apc
Ensign
Ensign
0 Likes
0
146

Re: PowerView Cable - 940-0110 - Desperate!!!

This was originally posted on APC forums on 9/18/2012


heh I actually had the exact same issue... I ended up finding another one, cant remember how, and took the opportunity to take it apart... there is no "pinout" available because there is a little PCB inside with 4 PNP transistors a relay and a pair of diodes... they also potted the whole thing (filled the connector with glue) so it was quite an adventure!

I would post the schematic but I am not sure how APC (and more importantly their legal department) would feel about that