Ask our Experts
Didn't find what you are looking for? Ask our experts!
Ask Me About Webinar: Data Center Assets - Modeling, Cooling, and CFD Simulation
Join our 30-minute expert session on July 10, 2025 (9:00 AM & 5:00 PM CET), to explore Digital Twins, cooling simulations, and IT infrastructure modeling. Learn how to boost resiliency and plan power capacity effectively. Register now to secure your spot!
Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Search in
Link copied. Please paste this link to share this article on your social media post.
Posted: 2025-03-06 08:31 AM
Hello 👋
I'm a newbie here and would like some ideas or suggestions for a backup cooling solution. We're a non-profit org and these past few days we've been having outages and worst is AC has been down for a few days. Our simple solution is to use a fan to reduce the hot air in our server room and leave the door open. I am looking for a mid-range cooling solution APC can offer or any suggestions are welcome.
Thank you and looking forward.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2025-03-06 11:56 PM . Last Modified: 2025-05-27 10:24 PM
Hello! The first step is to know what's the heat load of the room.
Below you can find a link to our Direct Expansion (Air Cooled) solutions:
https://download.schneider-electric.com/files?p_Doc_Ref=DX_InRow_Family_Brochure_EN
I suggest you send an email to customer support stating your case, workload and area of installation so you can be pair to a sales representative that can further help you, here's the email:
cac@schneider-electric.com
Thank you!
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2025-03-06 11:56 PM . Last Modified: 2025-05-27 10:24 PM
Hello! The first step is to know what's the heat load of the room.
Below you can find a link to our Direct Expansion (Air Cooled) solutions:
https://download.schneider-electric.com/files?p_Doc_Ref=DX_InRow_Family_Brochure_EN
I suggest you send an email to customer support stating your case, workload and area of installation so you can be pair to a sales representative that can further help you, here's the email:
cac@schneider-electric.com
Thank you!
Link copied. Please paste this link to share this article on your social media post.
You’ve reached the end of your document
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.