Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Posted: 2021-07-01 12:50 AM
This was originally posted on APC forums on 11/2/2011
Hello I have APC SmartUPC 1000. There is only one USB connector at back of device but I need transmit signal to two computers. Is there any way how to do it ? Like usb splitters etc ?
thanks in advance for reply
David
Posted: 2021-07-01 12:50 AM
This reply was originally posted by Angela on APC forums on 11/2/2011
unfortunately not. depending on the UPS model, the best option will be a network management card and powerchute network shutdown or some UPSs offer this idea/request via two serial connections (versus USB).
the network management card is what i recommend because it will gracefully shutdown devices over the network that are attached to the UPS but then it offers so much more for monitoring, managing, and accessing the card itself and the UPS.
Posted: 2021-07-01 12:50 AM
This reply was originally posted by Angela on APC forums on 11/2/2011
unfortunately not. depending on the UPS model, the best option will be a network management card and powerchute network shutdown or some UPSs offer this idea/request via two serial connections (versus USB).
the network management card is what i recommend because it will gracefully shutdown devices over the network that are attached to the UPS but then it offers so much more for monitoring, managing, and accessing the card itself and the UPS.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.