APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Posted: 2021-06-30 08:08 AM . Last Modified: 2024-03-07 10:14 PM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 08:08 AM . Last Modified: 2024-03-07 10:14 PM
I have a bunch of these cards coming in from field locations. I'd like to ensure that they have the latest firmware on them. When i go to APC's site for the 9606, in the [firmware section|http://www.apcc.com/resource/include/techspec_index.cfm?base_sku=AP9606&tab=Software], it only shows the 3.5.8 firmware for ap9617/18/19 cards. Going to APC's download section it is the same deal for SMART-UPS units.
Any Help?
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 08:08 AM . Last Modified: 2024-03-07 10:14 PM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 08:08 AM . Last Modified: 2024-03-07 10:14 PM
Per CFMR's post in a previous thead, you can get the latest 9606 fw, 3.2.6 here: ftp://ftp.apcc.com/apc/public/hardware/webcard/firmware/sumx/v326/
Here are the instructions for reflashing the card, I would recommend using the FTP method listed in the KBase doc below
http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/std_adp.php?p_faqid=768
Let us know if you need any further assistance regarding this.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 08:08 AM . Last Modified: 2024-03-07 10:14 PM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 08:08 AM . Last Modified: 2024-03-07 10:14 PM
Per CFMR's post in a previous thead, you can get the latest 9606 fw, 3.2.6 here: ftp://ftp.apcc.com/apc/public/hardware/webcard/firmware/sumx/v326/
Here are the instructions for reflashing the card, I would recommend using the FTP method listed in the KBase doc below
http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/std_adp.php?p_faqid=768
Let us know if you need any further assistance regarding this.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.