Symmetra 40K In bypass in response to an overload

dkleber_apc · ‎2021-07-12

We get alerted to these about once a month but I can't see what's triggering it, there isn't much on the UPS. Any idea on what I can do to stop these errors?

Quick Status

Load in Watts

Battery Capacity

56.4 %

100.0 %

Input Voltage:

116.5 | 115.9 | 115.8 VAC[Phase L1 | L2 | L3]

Output Voltage:

120.8 | 120.9 | 121.0 VAC[Phase L1 | L2 | L3]

Runtime Remaining:

41min

Last Battery Transfer:

Due to software command or UPS's test control

Recent UPS Events

Date	Time	Event
12/05/2018	08:21:06	UPS: Passed a self-test.

BillP · ‎2021-07-12

Hi,

The event indicates the UPS passed a self-test. That is a good thing. The UPS will run a self-test to verify the batteries can sustain the load.

If you have other concerns or further questions please contact APC by Schneider Electric 3 phase UPS support at 1-800-555-2725 then option 4

See Answer In Context

BillP · ‎2021-07-12

Hi,

The event indicates the UPS passed a self-test. That is a good thing. The UPS will run a self-test to verify the batteries can sustain the load.

If you have other concerns or further questions please contact APC by Schneider Electric 3 phase UPS support at 1-800-555-2725 then option 4

Symmetra 40K In bypass in response to an overload

Data Center Certified Associate Exam Development Path

Symmetra 40K In bypass in response to an overload

Welcome!