SmartUPS 750 - PowerChuteBE 9.1.1 DeviceStatus On Line,Battery discharged / Charge 100%

[BillP]

This question was originally posted by Mike on APC forums on 7/17/2014

---

My PowerChute Webconsole is showing this Status

Is is correct, that the Device Status is "On Line,Battery discharged" but the Battery Status is "Battery Charge 100,0%" ?

The Server was shutdown, can't say if it really was the UPS that cut the power since the PowerChute Agent was not running properly, and is now running normaly again.

[BillP · Accepted solution]

This reply was originally posted by Bill on APC forums on 7/17/2014

---

Hi,

Here is the description from the help file

Battery discharged

The UPS is On Line, but its battery charge is very low.

If you get a power outage when your battery is discharged, PowerChute immediately begins the process...

PowerChute displays this status immediately after a runtime calibration (which deeply discharges the...

Note: It is possible to see this status when the Battery Charge under Battery Status on this screen ...