Smart UPS and Turn Off Delay.

Anonymous user · ‎2021-06-27

I am setting up some Smart UPSs.

I have them connected with USB to the servers.

I've set one server i.e. to initiate shut-down after 30s on battery. This server is on outlet group 1.

I've then set the Outlet Group 1 as follows:

turn on delay: 0s

turn off delay: 150s (server needs around 90s to shutdown)

reboot duration: 8s

loadshed on battery: enabled

loadshed: 30s

So, it should wait 30 before going to turn off delay. then wait 150s and then turn off the power.

What it does it after 30s it turns the power off.

What am I configuring wrong?

Anonymous user · ‎2021-06-27

Jordan,

Thank you for your reply.

I thought that after the load shed time it would wait another 150s to turn-off.

Isn't this the turn off delay?

BillP · ‎2021-06-27

Anthony,

I believe this may have do to with the load shed you have enabled and configured for 30 seconds on group 1. Have you tried disabling load shed?

Anonymous user · ‎2021-06-27

Jordan,

Thank you for your reply.

I thought that after the load shed time it would wait another 150s to turn-off.

Isn't this the turn off delay?