APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Hi all,
I have a Smart-UPS SMX1500RMI2U and am looking at purchasing a 9617 Management card. Should the 2 be compatible?
Cheers.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Yes, just to confirm what was already discussed, AP9617/18/19 Network Management Card 1 devices are NOT compatible with newer UPS models like those beginning with SMX/SMT/SRT prefix.
Here is a Network Management Card compatibility chart for additional detail -> http://www.apc.com/support/index?page=content&country=ITB〈=en&locale=en_US&id=FA237786
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Look for "tabs" on the back of your UPS on each side of the Smart Slot. Only NMCs that can accept these "tabs" are compatible. I don't believe the AP9617 has the slots to accept them.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Thank you for the reply.
Yes, there are tabs there so the card wouldn't be compatible.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Purchase an AP9630 or AP9631.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-30 10:53 PM . Last Modified: 2024-03-06 10:33 PM
Yes, just to confirm what was already discussed, AP9617/18/19 Network Management Card 1 devices are NOT compatible with newer UPS models like those beginning with SMX/SMT/SRT prefix.
Here is a Network Management Card compatibility chart for additional detail -> http://www.apc.com/support/index?page=content&country=ITB〈=en&locale=en_US&id=FA237786
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.