Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84419members
353605posts

Quick question on Smart Ups 1400

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
leadhead_apc
Crewman
Crewman
0 Likes
2
154

Quick question on Smart Ups 1400

This was originally posted on APC forums on 10/5/2007


I have two of them.

Is it possible, if they have bad batteries that they will not turn on at all? They are both doing this, and I dont have a good battery to put in them to test out. I would like to know before hand because I would like to buy batteries for them if I know they will work when I install the new batteries.

I have basically reset their breakers and tried to push the powerbutton and nothing.. no lights no alarms.

Tags (3)

Accepted Solutions
leadhead_apc
Crewman
Crewman
0 Likes
0
154

Re: Quick question on Smart Ups 1400

This was originally posted on APC forums on 10/5/2007


Nope, these are fairly old. Thank you for the quick response, that was exactly what I needed to know.

- Leadhead

See Answer In Context

2 Replies 2
EZ_Button_apc
Commander
Commander
0 Likes
0
154

Re: Quick question on Smart Ups 1400

This was originally posted on APC forums on 10/5/2007


That is correct... If that unit doesn't have a battery or a good battery connected, it will not power on. The batteries are still hot swappable during battery replacement however. Some of the newer models starting with (SUA) in the model number will turn on w/o a battery connected.

leadhead_apc
Crewman
Crewman
0 Likes
0
155

Re: Quick question on Smart Ups 1400

This was originally posted on APC forums on 10/5/2007


Nope, these are fairly old. Thank you for the quick response, that was exactly what I needed to know.

- Leadhead