Network Management Card removal and changing IP address

[Anonymous user]

Hi All
I have to remove a Network Management Card from on UPS to another this friday, its a site that has no documentation so i dont know th IP of the card or the passwords for the Netwrok Shutdown agents. When i remove the card will the IP address be stored, if so how can i reset the card to defaults or change the IP address. Once ive done this im going to re-install the Netwrok Shutdonw Agents on all the servers and reconfigure. The card i an ap9617 i have no manuals either, i have quickly searched the site but time is limited as usual, so would be most greatfull if someone could point me in the correct direction.

Thanks in advance

[BillP · Accepted solution]

yes, IP settings will still be intact.

here is some set up information what cables you need, etc -> http://nam-en.apc.com/app/answers/detail/a_id/3061

here is the password reset procedure information -> http://nam-en.apc.com/app/answers/detail/a_id/7879

if you gain access to the NMC by resetting the password, navigate to System->Tools->Reset to defaults and you can reset all the settings. the first article i mentioned here goes through just editing network settings.