NEED MIB files for MGE Galaxy 7000 (G7TUPS400) & MGE Galaxy 5500 (G55TUPSM60HS) -IMPORTANT

[Anonymous user]

Hello,Its very Urgent

We have MGE Galaxy 7000 (G7TUPS400) & MGE Galaxy 5500 (G55TUPSM60HS).

The major problem is this,that we are not able to read MIB files from SNMP.

Could you please send me the MIB files of these two UPS?
and if you need additional information about UPSs tell me to get desire information that you want.

Regards

Matthew

[Anonymous user]

Hi

Thanks for your quick and complete reply Angela.

One more question remains,I checked out both of UPSs and realized  that the SNMP cards which installed on each of those , are AP9635CH , Is there any difference between AP9635 vs AP9635CH for using the powernet419.mib file?
And this file "powernet419.mib" is compatible with AP9635CH SNMP card to use?

Regards

Matthew

[voidstar_apc]

The Powernet MIB is the right one for your card.

[Anonymous user]

Hi VoidStar

Thanks,I have to test the mib file on UPSs.
By the way,thank you for your reply

[BillP · Accepted solution]

Also, no, there is no functional or firmware differences between CH and non-CH SKUs. I think the CH SKUs will eventually go away as they had slightly different branding on them (their front faceplate to be exact) originally intended for China only but then were eventually used worldwide.

[Anonymous user]

Hello.

I need MIBs for MGE Galaxy with 6674 Card.

Can you send me?

Thanks

[BillP · Accepted solution]

Sent to you via private message.

[Anonymous user]

Hi, I also couldn't find anywhere mib file for Galaxy7000, could You please share it?

Thanks in advance

Mike

[Urokadu]

Hi! I need the MIB files for the APC galaxy 7000 UPS. I found one MIB. But with it, my UPS is not being polled. Do you have these MIBs?