Multiple-UPS configuration of PCNS on CentOS

[Anonymous user]

I have got 2 Smart-UPS VT and I am trying to set up pcns223 on a CentOS 5.3 server. I want to use 2 Smart-UPS's in a multiple UPS configuration.
PCNS is successfully installed, but I cannot register powerchute with the management card. I receive the following message: "Incorrect UPS model detected. Registration failed" and PCNSConfig.sh returns to the "Management Card IP:" dialog. So the configuration does not finish, although IP address have actually registered on NMC.
1) I tried to set up any of my Smart-UPS VT as a single UPS, then PCNSConfig.sh finished without errors and pcns worked.
2) I tried to use jre 1.6 as well as bundled jre 1.5. Nothing changed.
3) I run PCNSConfig.sh once after installation.
4) Windows version of pcns233 works on Windows Server 2003 without problems.

Is there a fix for this?
Thanks

[Anonymous user]

Model: Smart-UPS VT 40 kVA
Firmware Revision: 912.0405.I
Manufacture Date: 04/29/08

[BillP · Accepted solution]

what are firmware revision of network management cards? Can you please check what are UPSs firmware ( goto UPS tab-about) info?