MIBs

[Anonymous user]

Hello,

I would like to monitor my UPS devices using SolarWinds Network Performance Monitor. When I browse the OID on the Solarwinds NPM application and attempt to test SNMP traffic with the UPS (such as batterylevel) I get a message saying OID is not supported.

I spoke with Solarwinds Support and they advise that I need to get a list of OIDs for the AP9619 and then create my own pollers. Where can I obtain this information?

Thank you,
D

[Anonymous user]

Hi Angela,

Ho do I incorporate the MIB?

Thank you
D

[BillP]

hi derek,

are you already using the APC PowerNet MIB? the APC MIB has support for all devices built into it.

the latest version is located here: ftp://ftp.apc.com/apc/public/software/pnetmib/mib/393/powernet393.mib

let us know if you already have that though and are looking for something else

[BillP]

well that should be something Solar Winds can help with. I am not familar with that NMS.

From what I do know, on the MIB browsers that I have used, you basically just load it into a certain folder or location and then the NMS finds it there and you can use it to poll/walk your devices. i assume it works similarly to that with Solar Winds.

Is that NMS command line or does it use a GUI? I have no idea.

[BillP]

The ftp link is asking for credentials and not accepting my forum ones.

[BillP]

Hi,

Here is a link to the latest MIB release.

https://www.apc.com/shop/us/en/products/POWERNET-MIB-V4-3-1/P-SFPMIB431

[epretorious-kt]

Thanks for sharing that link, Bill. But it returns an empty page!

Might the version have changed from 4.3.1?

TIA,

Eric P.

[epretorious-kt]

FYI: That FQHN is no longer valid...

> eric@e6400:~$ ftp ftp.apc.com/apc/public/software/pnetmib/mib/393/powernet393.mib
> ftp: ftp.apc.com/apc/public/software/pnetmib/mib/393/powernet393.mib: Name or service not known

HTH,

Eric P.

[Shaun]

Hi Eric,

The current version is https://www.apc.com/shop/us/en/products/PowerNet-MIB-v4-3-7/P-SFPMIB437

As the version bumps regularly, the easiest way to find these is to put "powernet" in the search box on apc.com 

[epretorious-kt · Accepted solution]

Thanks, Shaun!

Eric P.