
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
Legacy unit firmware
Hi,
Auditing our admittedly ancient units (2006/7) I have the following models (with firmware version)
2x Smart-UPS 3000 666.6.I
2x Smart-UPS 2200 665.6.I
One of the 2200's needs a new battery, and the 2200's have also recently started coming up on our Nessus scans as having vulnerabilities in the Treck TCP/IP stack. Is anyone aware of any firmware updates beyond the ones above that may address this? I suspect I may need to request that we replace these.
Thanks.
- Labels:
-
Smart-UPS & Symmetra LX | RM
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
Hi Chris,
We'd need to know what model of NMC installed in the units, if they are running an NMC2 then go to the following page for the latest update:
https://www.apc.com/ie/en/faqs/FA410359/
You can tell the model by looking at the card, it will say Network Management Card or Network Management Card 2.
-Gavan
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
Hi Chris,
We'd need to know what model of NMC installed in the units, if they are running an NMC2 then go to the following page for the latest update:
https://www.apc.com/ie/en/faqs/FA410359/
You can tell the model by looking at the card, it will say Network Management Card or Network Management Card 2.
-Gavan
Link copied. Please paste this link to share this article on your social media post.

Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
Thanks for that. They are all AP9617/9619, so not NMC2 after all.
For now I will just disconnect from the network and reconnect when I need to check the status, pending replacement.
Link copied. Please paste this link to share this article on your social media post.

