Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Posted: 2021-06-30 09:42 PM
This was originally posted on APC forums on 8/23/2016
Bonjour,
Si possible de m'aider à Installer et configurer une carte AP9631 sur Smart-UPS 3000 pour 2 serveurs connectés sur l'onduleur
Posted: 2021-06-30 09:43 PM
This was originally posted on APC forums on 1/21/2017
Bonjour,
Merci de m'aider à resoudre ce probléme:
Name : APC
Location : Unknown
Contact : Unknown
http://FE80::2C0:B7FF:FE5C:7C48
Serial Number : ZA1135025721
Date : 01/20/2017
Time : 14:35:54
Code : 0x0345
Critical Events - Environment: Lost the local network management interface-to-integrated Environmental Monitor (Universal I/O at Port 1) communication.
Posted: 2021-06-30 09:42 PM
This reply was originally posted by Nicole on APC forums on 8/25/2016
Hello,
Please follow this knowledge base on how to configure a network management card: http://www.schneider-electric.us/en/faqs/FA156064/.
To set up shutdown of servers, you can download our software called PowerChute Network Shutdown at this location: http://www.apc.com/us/en/tools/download/. You can find the user manual in this location as well.
Regards,
Nicole
Posted: 2021-06-30 09:42 PM
This was originally posted on APC forums on 8/29/2016
Bonjour,
Merci pour tout ça marche maintenant.
Mais j'ai eu autre requette c'est de configurer de tel sorte que l'APC m'envoi des notifications vers mon mail de gmail.
Sachant que je n'ai pas de serveur SMTP local.
Merci d'avance
Posted: 2021-06-30 09:42 PM
This reply was originally posted by Bill on APC forums on 8/29/2016
Hi,
Please review Knowledge Base document FA164769 "How To: Configuring an APC Network Management Card with popular email services such as Gmail, Yahoo!, Office 365, and Hotmail/Outlook.com"
Posted: 2021-06-30 09:42 PM
This was originally posted on APC forums on 8/30/2016
Bonsoir,
J'ai un soucis avec ce modele d'onduleur Smart-UPS C 1500 SMC1500I dont un serveur est connecté.
En mettant un cable serial avec convertisseur USB l'onduleur s'eteint brusquement.
Je vous juste pourvoir configuré l'arret du serveur avec l'onduleur en cas de coupure.
Merci
Posted: 2021-06-30 09:43 PM
This reply was originally posted by Bill on APC forums on 8/31/2016
Hi,
Please contact local support for assistance. Here is a link to the local support contact page.
Posted: 2021-06-30 09:43 PM
This was originally posted on APC forums on 1/21/2017
Bonjour,
Merci de m'aider à resoudre ce probléme:
Name : APC
Location : Unknown
Contact : Unknown
http://FE80::2C0:B7FF:FE5C:7C48
Serial Number : ZA1135025721
Date : 01/20/2017
Time : 14:35:54
Code : 0x0345
Critical Events - Environment: Lost the local network management interface-to-integrated Environmental Monitor (Universal I/O at Port 1) communication.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.