Configuring syslog through CLI

[Anonymous user]

Is there no option on AOS 6.2.1 to configure syslog settings through CLI with the NMC type AP9631? 

[BillP]

Hello,

I don't see it. And I also checked v6.4.0 which will be released in the next week or so. I only see it available to configure via the web UI or config.ini configuration file as of today. I will log an enhancement request to see if we can add it in a future release.

[Anonymous user]

Thanks! 

[BillP]

I have over 250 APC's I manage. being forced to use the web interface is rough.

I script everything in VBScript/Secure CRT.

any recommendations for me?

[BillP]

Perhaps using the config.ini file offered with the Network Management Card platform? Below is an exerpt from it. You can configure Syslog settings among many others in this file and then use FTP (we offer a free utility to do this - called INI Utility) or SCP or our StruxureWare Data Center Expert appliance to cascade this file and the same settings across multiple units.

[NetworkSYSLOG]
Syslog=enabled
Facility=User
Server1=0.0.0.0
Server2=0.0.0.0
Server3=0.0.0.0
Server4=0.0.0.0
Port1=514
Port2=514
Port3=514
Port4=514
Protocol1=0
Protocol2=0
Protocol3=0
Protocol4=0
Language1=enUs
Language2=enUs
Language3=enUs
Language4=enUs
SyslogMapCritical=Info
SyslogMapWarning=Warning
SyslogMapInformational=Info

[Anonymous user · Accepted solution]

Did anyone ever wonder why Critical & Informational syslogs map similarly to Info?

SyslogMapCritical=Info
SyslogMapWarning=Warning
SyslogMapInformational=Info