Configure Remote Access to Smart UPS 1500 XLM

[BillP]

How can i configure mySmart UPS to be remotely controlled using Ethernet so I can control it from outside the office. For some reason i have a hard time finding the instruction. I apreaciate your help.

[BillP · Accepted solution]

no problem!

[BillP]

Perfect info. I ll do the configuration tomorrow and let you know.
Thanks for your help.

[BillP · Accepted solution]

hi-

since this particular product has a network management card built in - i suggest [taking a look at this article on how to make your network management card communicate on the network|http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/std_adp.php?p_faqid=3061] so you can put an IP address on the card and remotely control the UPS.

let us know if you need anything else!