Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Posted: 2021-07-01 06:25 AM
This was originally posted on APC forums on 11/6/2014
Hi All,
I have upgraded one of our NMC's to v6.2 a while ago, last week I needed to replace the battey pack. when changing the date for battery replacement, I noticed that the drop down box only goes to the year 2014.
We have approx 400 UPs's scattered around Australia and I know for sure that I will need to change some batteries next year.
Is there a new version comming out with an advance on the years in the battery replacement drop box?
Thanks
Phil.
Posted: 2021-07-01 06:25 AM
This was originally posted on APC forums on 11/9/2014
Thanks Angela,
I changed the date to 2015 on one my test UPS's and checked the battery replacement drop down box and as you correctly said 2015 is selectable.
Posted: 2021-07-01 06:25 AM
This reply was originally posted by Angela on APC forums on 11/7/2014
The list is populated on the current date and time set on the Network Management Card. It does not want to allow you to set a date in the future so when 2015 is upon us, you should see it on the list assuming the Network Management Card has the correct date/time set. I suppose you could test it by setting the date to the future if you wanted.
Posted: 2021-07-01 06:25 AM
This was originally posted on APC forums on 11/9/2014
Thanks Angela,
I changed the date to 2015 on one my test UPS's and checked the battery replacement drop down box and as you correctly said 2015 is selectable.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.