Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hi Don,
You should've received a RJ-45 to USB cable. The ends look like this hopefully:
The RJ-45 connector end (shown in the left of the above photo) plugs into the port labeled "data port" on the rear of your UPS. The USB connector goes to your iMac.
The below picture should be generally what the back/rear of your UPS looks like. The "data port" is item #2.
Link copied. Please paste this link to share this article on your social media post.
Hi Don,
You should've received a RJ-45 to USB cable. The ends look like this hopefully:
The RJ-45 connector end (shown in the left of the above photo) plugs into the port labeled "data port" on the rear of your UPS. The USB connector goes to your iMac.
The below picture should be generally what the back/rear of your UPS looks like. The "data port" is item #2.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.