APC SmartUPS 1500XI USB and QNAP TS459U-RP+

Anonymous user · ‎2021-07-01

Hi,

we have a SmartUPS 1500XI connected via USB to a Windows 2003 R2 Server running PowerChute Business. Now we have a QNAP NAS that has a USV Support. I can set it up to listen to a server. Its called USV Network Slave Mode.

Can i set it up to listen to the PowerChute Server?

THX

Maik

BillP · ‎2021-07-01

you probably need to either connect it to USB (which is already connected to the server it seems) or get a network management card if network is an option. one UPS can only support one USB device at a time so the only other option would be to see if your NAS supports SNMP or an APC network management card.

See Answer In Context

BillP · ‎2021-07-01

you probably need to either connect it to USB (which is already connected to the server it seems) or get a network management card if network is an option. one UPS can only support one USB device at a time so the only other option would be to see if your NAS supports SNMP or an APC network management card.

APC SmartUPS 1500XI USB and QNAP TS459U-RP+

APC SmartUPS 1500XI USB and QNAP TS459U-RP+

This is a heading