Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84597members
353862posts

AP9620 - AP9622. Does it work?

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
BillP
Administrator Administrator
Administrator
0 Likes
9
433

AP9620 - AP9622. Does it work?

This question was originally posted by Priya on APC forums on 8/19/2015


 I would like to have the confirmation that if I use the card AP9620 with an SMX UPS, the UPS will be ale to communicate to the AP9622 modbus jbus card


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Angela on APC forums on 8/25/2015


You're welcome!

See Answer In Context

9 Replies 9
BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Angela on APC forums on 8/19/2015


No, you can't do this.

We have Modbus supported directly on some SMT/SMX models. Today, it is mostly SMT models but SMX models will natively support Modbus over USB or serial communications soon. If you can specify the model SKU you have, I can check the status and verify the model will be getting Modbus via a UPS firmware upgrade.

Later this year, Smart-UPS products will also get Modbus support via AP9635/AP9635CH Network Management Card 2 via Modbus over serial or Modbus TCP.

BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Priya on APC forums on 8/20/2015


Hi Angela,

Thanks for your quick reply. I have SMX3000HV.

 

BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Priya on APC forums on 8/20/2015


If it does not work, what do you recommend?

Note that the UPS must be able  to give 8 hrs at 1200 W load.

BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Priya on APC forums on 8/20/2015


I wanted to prpose to my client SUT10000XLI. This works without any issues with the AP9622 modbus card, right?

BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Angela on APC forums on 8/20/2015


I assume you mean SURT10000XLI? Yes, it works with AP9622.

BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Priya on APC forums on 8/21/2015


Yes, sorry I meant SURT10000XLI. Can you give me details regarding installation of AP9622 with SMX3000HV UPS?

 

BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Angela on APC forums on 8/21/2015


AP9622 is not supported in UPS models beginning with SMT/SMX/SURTD/SRT unfortunately. Here are the list of compatible UPSs with AP9622 -> http://www.schneider-electric.us/support/index?page=content&country=US〈=en&locale=en_US&id=FA156127 

If you want Modbus on SMX3000HV the options today will be: 

  • Wait for AP9635 accessory to be supported with v6.3.X firmware that supports Modbus output. Tentative ETA is Nov/Dec 2015.
  • Wait for SMX model UPSs to support Modbus natively within their own firmware. ETA is currently unknown and I'd have to research further.
  • Look into something like an SNMPv1/v3 to Modbus gateway that can convert a protocol SMX3000 supports today, such as SNMP, to Modbus protocol
  • Use another monitoring protocol such as SNMP to monitor the UPS

Let me know if you have any questions.

BillP
Administrator Administrator
Administrator
0 Likes
0
433

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Priya on APC forums on 8/25/2015


Hello Angela,

That clear now, thanks. No, I dont have further queries.

 

Kind Regards

Priya

BillP
Administrator Administrator
Administrator
0 Likes
0
434

Re: AP9620 - AP9622. Does it work?

This reply was originally posted by Angela on APC forums on 8/25/2015


You're welcome!