AP8659 Firmware Download Issue

[ericmcd81]

I have an APC AP 8659 PDU with an apparently corrupted rpdug2 application on it (the app status is A-). The bootmon and AOS look to be good based on the status when I ssh into the unit. The Firmware version appears to be at 6.8.0 (AOS 6.8.2, Bootmon 1.0.9), so I went to the website to try to download 6.8.0, but every 6.8.0 page has embedded links back to 6.5.6 which is frankly infuriating. I also can't seem to access the APC FTP site to check and see if I can find it there. Would someone be able to provide me a link to 6.8.0, or baring that, is it possible to downgrade the whole unit (bootmon, AOS and APP) back to 6.5.6. Thank you all for your time.

[JohnBT]

Hello,

I sent you a DM to download FW 6.8.0.  I will also include FW 7.0.4 which is the latest.

[AndreasG]

Same issue with trying to download the latest and greatest firmware for AP8659. They run on OS 6.8.2 (App 6.8.0) and because of some SNMP hicups I was looking for fresh firmware for the maintenance window... but.. am I doing something wrong? Why isn't it listed anywhere? Reasons I've missed? So weird. 7.0.4 is out as well... where did you find that? Cheers!

[JonPro]

Hello @AndreasG,

I have sent you a DM that has the link to where you can download the v7.0.4 PDU firmware.

[systeembeheer_apc]

Hi we are running on software version 6.7.2 wanted to download a new firmware version but cannot find it anywhere on the Schneider site. Any help please?

[JohnBT]

Hello,

I sent you a DM where you can download the latest firmware.

Cheers,

[Bosquet]

Hi we are running on software version AOS 6.8.2 and APP 6.8.0 wanted to download a new firmware version but cannot find it anywhere on the Schneider site. Any help please? I don't have acces to the web access. but Linux ssh access is ok

[JohnBT]

Hello @Bosquet 

You can download the latest firmware on the link below.

Network Management Card v7.0.8 RPDU 2G Firmware Executable | Schneider Electric (se.com)

[Hans_]

Hi John, can you please send me APC AOS 6.8.2

[TRBL]

Does this firmware work with a hardware level 2 AP8659 and can I upgrade straight to it from my current versions (see below)

Thanks