Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2903:59 AM. Last Modified: 2024-03-1301:58 AM
A discharged battery condition 3000XL
I have a 3000XLT with 3 external UXABP48 battery packs purchased in may 2011. I am getting 0 to 20 minute runtime with a 42% load. Any test I do it goes to battery discharge or low condition. What do I need to do?
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2903:59 AM. Last Modified: 2024-03-1301:58 AM
Are you using any software or a network management card? I would first make sure either one is configured to show the number of external batteries so it will give you the proper runtime.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2903:59 AM. Last Modified: 2024-03-1301:58 AM
Are you using any software or a network management card? I would first make sure either one is configured to show the number of external batteries so it will give you the proper runtime.