Reporting

Go to the Devices page and click Compare sensors...     Select the devices you want to compare, and then click Compare.   Select the sensors you want to plot from the list for each device and click Plot sensors. Note: You can toggle the Display threshold configuration to see whether the sensors you selected have thresholds configured in IT Expert.     You can hover over the graph to highlight the sensor in the list and see datapoints.    For numeric sensors, view sensor metrics in a table below the graph, including: Units; Last known value; Minimum, Maximum, and Average value; Delta by value and by time.    Select the timeframe you want to see. You can plot sensors for one hour up to 365 days or choose a custom date range. Six hours is the default.   Sensor history goes back to February 2022 and will continue to increase over time to a maximum of 4 years. Note: Sensor history for EcoStruxure Ready Smart-UPS that use the SmartConnect port to connect starts in October 2022 and will continue to increase over time to a maximum of 4 years.   Select Split graph by to split the graph by sensor or unit.   Select Zoom to fit to see variations in the data in more detail.   Click Save to save the sensor plot on the Reports page.   Click Add to dashboard to add a widget directly to a dashboard. Note: When you create a widget on the dashboard, you can display sensor data for up to 30 days.

    Click the menu icon in the tile to Delete the sensor plot report or Configure report options to schedule emailed reports.   Create a sensor plot   To create a sensor plot from a device:   Select a device on the Inventory tab.   Click the Sensors tab. Select the sensors you want to plot. Use quotes to filter lists by exact phrase, for example, "phase 3" You can click the star to mark sensors as a favorite, create thresholds on sensors, and toggle Display thresholds configurations to see sensors that have thresholds configured.   Click the toggle to see sensors that have thresholds configured. Click Configure new threshold to create a threshold on a sensor. To compare sensors, click Compare sensors... on the Inventory tab. Select the devices you want to compare, and then click Compare. You can then select the sensors you want to plot from the list for each device. 10207692214301_360021340733.png   Click Plot sensor. Select Sensor and then toggle Highlight threshold zones to see sensors that have thresholds configured. Hover to view details for data points on the graph. For numeric sensors, view sensor metrics in a table below the graph, including: Units; Last known value; Minimum, Maximum, and Average value; Delta by value and by time.   Select the timeframe you want to see. You can plot sensors for one hour up to 365 days or choose a custom date range. Six hours is the default. Sensor history goes back to February 2022 and will continue to increase over time to a maximum of 4 years. Note: Sensor history for EcoStruxure Ready Smart-UPS that use the SmartConnect port to connect starts in October 2022 and will continue to increase over time to a maximum of 4 years.   Select Split graph by to split the graph by sensor or unit.   Select Zoom to fit to see variations in the data in more detail.   Select Save to save the sensor plot on the Reporting tab.   Select Add to dashboard to add a widget directly to a dashboard. Note: When you create a widget on the dashboard, you can display sensor data for up to 30 days.   To configure thresholds on multiple devices, see Configure alarm thresholds for notifications.   Schedule a sensor plot report   Go to Reporting > Sensor plots.   Select a tile to view the sensor plot report, and then click Configure report options to schedule a daily, weekly, or monthly emailed report.     Note: To schedule a report directly from the report tile on the Sensor plots tab, click the menu icon on the tile and click Configure report options.   Toggle Send scheduled report to view configuration options.   Specify how often you want the report to be sent; the units, language, and time zone; and the email address of at least one recipient. You can also change the report name if needed.   Click Save to save the report as a scheduled report, or click Save as new to save a new report as a scheduled report and keep the original report as non-scheduled.   See also Share a sensor plot  Add a sensor plot to a dashboard

You can add a widget directly to a dashboard from the sensor plotting page. When you create a widget on the dashboard, you can display sensor data for up to 30 days.   Add the widget to an existing dashboard (based on your current location and permissions) or create a new dashboard and add the sensor plot to it.   Create a sensor plot. Click Add to dashboard. Label the widget, and select Add to existing dashboard or Create new dashboard. Choose the location for the dashboard. Click Add.   Add to existing dashboard     Create new dashboard    

Go to Reporting > Sensor plots.   Open a sensor plot.   Click Export to CSV to download the measurements or metrics data in CSV format or click Print to save the sensor plot, including metrics, as a PDF.    You can schedule an emailed sensor plot report. See how   Exported CSV sensor plot reports for 30 days or less include all sensor data. Exported CSV sensor plot reports for more than 30 days intelligently sample the sensor data to include changes, min, and max and values.