Connecting SCADAPack 337E to ClearSCADA 2015 r2

zahidhossain · ‎2022-02-16

I want to connect the SCADAPack 337E to ClearScada 2015 r2 . Also i want to sent the command to SCADAPack 337E from the ClearScada 2015 r2 . I searched the google but didn't get any answer. Please help me to find out the proper steps to do that .

Joel_Weder · ‎2022-02-17

Hello Zahid,

Before we can assist you, we must know which communication protocol you intend to use. This changes the requirements a lot. Eg serial Modbus RTU, Modbus/TCP, Modbus/UDP, DNP3 serial, DNP3/TCP, DNP3/UDP ?? You see there are a lot of options.

Joel Weder
Remote Operations Specialist
Schneider Electric

BevanWeiss · ‎2022-02-17

You should probably look to watch through some videos around Geo SCADA Expert / ClearSCADA

https://www.youtube.com/watch?v=4WlRhKVcAlw&list=PLa7UGrWOTyjnPpCJxnTZkdBM_6D70qoKl

Lead Control Systems Engineer for Alliance Automation (VIC).
All opinions are my own and do not represent the opinions or policies of my employer, or of my cat..

zahidhossain · ‎2022-02-18

Thank You for the reply .

Both the Modbus TCP and DNP3 TCP. We have the both protocol supported device.