PowerLogic T300 - Configuration to connect a "slave" IEC 61850 device

[Hoang_Phu]

Hello engineers. I am new to HU250. If possible, please provide an example of adding a device to T300 using IEC 61850 protocol.

[JuanRayo]

Hello Hoang.  The doc attached is a brief summary with the first steps to be taken. I wish it helps you

[TomBerry · Accepted solution]

See the Easergy Builder help document IEC61850 Ed2 Devices_EN_Rev1.6.pdf

Start with chapter 9 - IEC 61850 Overview in order to understand some of the concepts and terminology.

And then go back to chapters 1,2 and 3 which explain how it works on the T300 (and T500)

[Hoang_Phu]

@TomBerry  @JuanRayo  Thank you very much, guys.