Metering & Power Quality
Schneider Electric support forum about Power Meters (ION, PowerTag, PowerLogic) and Power Quality from design, implementation to troubleshooting and more.
Posted: 2013-11-13 07:01 PM
Link copied. Please paste this link to share this article on your social media post.
I'm trying to pursue different segments for BCPM, MCM and latest iEM3000.
My purpose is to answer different applications with our best product available.
All comments are appreciated.
Link copied. Please paste this link to share this article on your social media post.
The short answer is: it depends. It depends mainly on the segment / application you are using the meter. BCPMs are more suitable for data centers, mainly because of the number of circuits it can measure, the alarming capabilities, integration with Struxureware, etc. The MCMs and iEM3000 are more suitable for buildings, where the number of circuits to measure with one single meter tend to be smaller, and focus is much more on energy consumption than alarming. We are researching the possibility of coming up with a BCPM offer that will better address the needs for the buildings market (MCMs are an aging platform, iEM3000 are not really a multi-circuit, although they can measure three single phase circuits). Stay tuned!
Posted: 2013-11-26 03:01 AM
Link copied. Please paste this link to share this article on your social media post.
The new offer is still from Veris?
Link copied. Please paste this link to share this article on your social media post.
Probably, but it's still not clear at this point yet.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.