PM5000 description of Modbus commands

[dborle]

Hi guys,

Does someone have a description on how to send commands over Modbus to the PM5000 (e.g. for giving a reset command over Modbus to the PM5000)?

Thanks

Daniel

[dborle · Accepted solution]

OK, I got the answer from technical support!

In the case, someone else is interested in it:

[Adrian_Dicea]

Hi Daniel,

The information is useful. Thank you for sharing.

However, @ Tech Support please note that all please notes could have been avoided and 4x register addresses entered as in the documentation (without offset):

Cheers,

Adrian